STONESHIELD MOULD-X is a specially formulated fast acting cleaner for the removal of mould & mildew, black stains and algae.
Regular use prevents the re-growth of mould and mildew.
Cleans and disinfects all in one.
Uses:
Use internally on ceramic, porcelain and enamel surfaces; tiles and tile grout in bathrooms and showers.
Use externally on bricks, walls, paving, floor and roof tiles.
Dilutions:
Use undiluted as supplied.
Method of application:
Always test on a small area first to ensure suitability. Pour contents into a suitable trigger or pump spray. Hold sprayer or pump 20- 30 cm away from surface to be cleaned. Evenly and thoroughly spray the surface to be cleaned. Allow the product to work for at least 30 minutes undisturbed. If mould or mildew has not been completely removed, re-apply product to those areas again. In severe cases scrubbing may be required. After mould and mildew has been removed rinse thoroughly with water where required. For applying on to ceilings or overhead, spray onto a sponge first and apply by hand.
Precautions:
Ensure good ventilation and avoid breathing vapours. Avoid skin and eye contact. Wear goggles, gloves and suitable protective clothing when necessary. Keep out of reach of children and pets and store away from other chemicals. Do not mix with other chemicals. Do not allow contact with fabrics, clothing, pigment sensitive paint and other sensitive surfaces.
Litre Availability:
500 ml Ready to Use | 5 litres
Under no circumstances shall STONESHIELD accept any liability for damage, direct or consequential, arising from any use or misuse of our products. Always test first. No warranties express or implied, including those of merchantability or fitness for particular purpose extend beyond the description on this label. Determining suitability of product shall be the sole responsibility of the user.
