STONESHIELD MARBLE CRYSTALISER is a specially formulated machine buffable polish for maintaining and protecting the surface shine of polished marble, travertine and limestone.
· Also effective for the restoration of dull and lightly worn marble and travertine when used in conjunction with STONESHIELD MARBLE POLISHING POWDER.
· For internal use only.
Uses:
· Suitable on polished marble, travertine and limestone.
Dilutions:
Use undiluted as supplied
Coverage:
Approx. 100 m2 per litre depending on porosity, surface texture, hardness of stone and method of application.
Method of application:
Always test on a small area first, to ensure suitability and desired result. Tile surface should be clean, dry and free of sealers, waxes and grout residue. Spray STONESHIELD MARBLE CRYSTALISER directly on to the surface and buff with a floor or hand machine of 175 to 300 R.P.M. using a white synthetic pad or steel wool. Use steel wool grade #0 for maintenance buffing and steel wool #2 for restoration work. Buff dry until an even shine is achieved. Several applications may be required when restoring dull surfaces. In the event of using steel wool, sweep up all loose steel fibres.
Limitations:
Not intended to be used as a stand-alone surface restoration product on badly scratched or worn marble or travertine surfaces. Not for use externally. Do not use where slippery conditions may occur. Ineffective on polished granite surfaces. Store and use between 16° C and 32°C only.
Precautions:
Ensure good ventilation and avoid breathing mist. Avoid skin and eye contact. Wear goggles, gloves and suitable protective clothing when necessary. Keep out of reach of children and pets and store away from other chemicals. Do not allow contact with other sensitive surfaces.
