STONESHIELD QUARRI-SEAL® is a· premium quality, non-yellowing, solvent based resin sealer that provides a satin finish, superior stain resistance and surface protection.
- A penetrating sealer that colour enhances and provides a “wet look” finish.
- For interior and exterior use.
Uses:
Suitable on low, medium and high porosity tiles including terracotta, slate, slasto, sandstone, cement tiles and pavers, oxided cement floors, terrazzo, natural stone and quarry tiles.
Coverage:
Approx. 10 m2 per litre per coat depending on porosity, surface texture, temperature and method of application. Minimum of 2 coats required.
Expected wear:
Will vary depending on texture, hardness of surface, area, traffic, maintenance, weather and use of aggressive cleaners. Expected wear- up to 5 years.
Method of Application:
Allow surface to dry for 24 hours after washing, prior to sealing. Test on a small area first, to ensure suitability and desired result. Surface must be clean, 100% dry, free of sealers, waxes and grout residue. Thoroughly stir contents, prior to application. Apply thin even coats of sealer, in one direction, using a lambswool applicator or a solvent resistant sponge roller only. Do not allow pooling or bubbles to form.
Cure Times:
Allow 2 hours between coats. Foot traffic after 8 hours. Do not apply externally if rain is expected within 12 hours. Full cure in 48 hours.
Test:
After 2 hours apply water droplets to 1 tile, if water is absorbed, apply additional coats. A consistent even sheen is required.
Maintenance:
Only use STONESHIELD DAILY CLEAN to prolong the life of the sealer. Re-apply STONESHIELD QUARRI-SEAL® if signs of wear occur.
Limitations:
Do not apply to damp tiles. Do not apply in direct sunlight and on to hot tiles. Allow 10 - 14 days after laying with a quality tile adhesive before sealing. Do not wet tiles or floors for at least 48 hours after sealing. Not suitable for use on polished stone, glazed ceramic and porcelain tiles. Store and use between 16° C and 32° C only.
Precautions:
Ensure good ventilation and avoid breathing vapours. Avoid skin and eye contact. Wear goggles, gloves and suitable protective clothing when necessary. Keep out of reach of children and pets and store away from other chemicals. Do not allow contact with other sensitive surfaces. Flammable.
Litre Availability:
1 litre | 5 litres | 25 litres
Under no circumstances shall STONESHIELD accept any liability for damage, direct or consequential, arising from the use or misuse of our products. Always test first. No warranties express or implied, including those of merchantability or fitness for particular purpose extend beyond the description on this label. Determining suitability of product shall be the sole responsibility of the user.